Need hose clamp recommendation for gates transmission hose 3/8 (1 Viewer)

[96eighty]

Hi everyone,

Does anyone know what type of hose clamp I should use when replacing my transmission cooler hoses with the Gates green stripe 3/8 oil cooler hose?
Gates Green Stripe Oil Cooler 3/8

I believe going with a constant tension hose is going to be the right choice here, that being said I'm wondering if there's a Toyota hose clamp that works with an outer diameter of 5/8ths of an inch. Any suggestions are appreciated, thanks!

 

[ceylonfj40nut]

Use OEM clamps.

 

[TomH]

Check Belmetric CTC16BAND12. I ordered these based on another thread. I haven't used them yet but it looks like they will work.

 

[96eighty]

Use OEM clamps.

Which OEM hose clamp should I use?

 

[96eighty]

Check Belmetric CTC16BAND12. I ordered these based on another thread. I haven't used them yet but it looks like they will work.

Those look like a great deal. A lot cheaper than the Gates brand. Do you have to link to the thread by chance?

 

[TomH]

Those look like a great deal. A lot cheaper than the Gates brand. Do you have to link to the thread by chance?

Transmission hose replacement using non-OEM parts

I'm trying to get the new Gates hose over that barb/elbow behind the headlight. The short run that goes to the cooler. 5 hours ago I instructed the dog to grab her leash cuz this is gonna be quick and easy today. Cue Gilligan's Island theme here... I cannot for the life of me get this hose...

forum.ih8mud.com

 

[vipergrhd]

 

[Kernal]

FWIW, the majority of aftermarket hose clamps, especially if the price is very low, are made in C - C - P chy nah.

Breeze Constant Torque clamps AFAIK are still made in the USA (be on the lookout for cheapo chy nese copies).

There was a thread some time ago where someone listed all the OEM part numbers for the various sizes of OEM clamps, one of those will fit and work as designed.

 

[ERG80]

80 series Transmission Hose Clamp

80 series Transmission Hose Clamp (THC-1) 90467-A0012

absolute-wits-end.com

 

[gummycarbs]

I bought an assortment by Hilitichi on Amazon. It worked fine for any place where I couldn't reuse a Toyota spring clamp.

 

[96eighty]

80 series Transmission Hose Clamp

80 series Transmission Hose Clamp (THC-1) 90467-A0012

absolute-wits-end.com

Will these work with the smaller OD gates hose??

 

[ERG80]

Will these work with the smaller OD gates hose??

If the gates hose is smaller i don’t know. Sorry.

 

[gummycarbs]

Will these work with the smaller OD gates hose??

You could measure the hose and order clamps from McMaster.