wagonteeth
Hippoverde
I'm putting my engine back together after finally getting the head machined. It's been down and apart for 3 years and I'm surprised with how many parts and bolts I kept up with, labeled, bagged and such, but I'm running into a couple missing or misplaced bolts. These are the two nuts and bolts that go through the oil pump. I think that they go in from the back of the pump drive and secure with a nut on the front by (or through) the timing cover.
Thing is I can't find a clear picture anywhere, or the bolts and nuts listed on any parts list. Anyone have a moment to snap a clear, well lit picture of the timing cover by the oil pump cover and these two bolts? These aren't the 7 screws, but there is one nut/bolt below the timing cover and one just above it at the oil pump cover.
Thing is I can't find a clear picture anywhere, or the bolts and nuts listed on any parts list. Anyone have a moment to snap a clear, well lit picture of the timing cover by the oil pump cover and these two bolts? These aren't the 7 screws, but there is one nut/bolt below the timing cover and one just above it at the oil pump cover.