Need Help on Method Wheel Fitment (slightly urgent) (1 Viewer)

[Ironsides]

I have been searching and have put in so many hours on the computer using the search bar for various different things regarding my rebuild.

My question, will Method 305's with 0 offset with 35x10.5x17 fit my rig? I went off several FB posts with dudes running the same wheels but now I am told I will have fitment issues.

Thanks in advance for any and all help.

Flame suit on since I only searched for an hour relating to this "specific" issue.

 

[JunkCrzr89]

IIRC, 25-35 offset range is ideal for fitting 35s up front.

 

[Ironsides]

IIRC, 25-35 offset range is ideal for fitting 35s up front.

Thanks. Returning them.

 

[suprarx7nut]

0 offset and 35's will create unnecessary challenges.

I like 40 offset with 33+s. Enough to push you away from the control arms, but not enough poke to start rubbing the fenders and liners. 35's will inevitably require some work, but the less offset (closer to 0) the more work you make for yourself.

 

[Ironsides]

0 offset and 35's will create unnecessary challenges.

I like 40 offset with 33+s. Enough to push you away from the control arms, but not enough poke to start rubbing the fenders and liners. 35's will inevitably require some work, but the less offset (closer to 0) the more work you make for yourself.

Appreciate the reply. Method has a 703 with 35 offset I was going to consider.

Any wheel brands you recommend besides icon and fuel? I’ll start a search but recommendations are welcome.

 

[suprarx7nut]

Appreciate the reply. Method has a 703 with 35 offset I was going to consider.

Any wheel brands you recommend besides icon and fuel? I’ll start a search but recommendations are welcome.

I'm partial to Braid myself...