desmogged A/C-less P/S-less 2F motor (possibly '80) with a 1F alternator on the driver side - belt runs over crank, water pump and alternator - length required is about 41.5" (stock size for a '72 ?)
the Napa replacement belt I got is 17mm (and now squeals despite proper tension and pulley alignment), while the belt that was in the truck is 15mm wide at the outside (and did not squeal; replaced it due to stress cracks from the dry heat) - the old belt also has smaller teeth; I cannot find any markings
anybody have info on 15mm belts
the Napa replacement belt I got is 17mm (and now squeals despite proper tension and pulley alignment), while the belt that was in the truck is 15mm wide at the outside (and did not squeal; replaced it due to stress cracks from the dry heat) - the old belt also has smaller teeth; I cannot find any markings
anybody have info on 15mm belts