thecrazygreek
A.K.A. TheCraftyGreek
- Location
- United States
I have a 64 big window carb
Need the spacer. Shipping to 97304.
Thx!
Need the spacer. Shipping to 97304.
Thx!
Wanted Need a single barrel carb spacer.
- Thread starter thecrazygreek
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
With or without PCV tube?
If you don't need one with a PCV tune, you can use a spacer from a an old Ford 200cid engine and drill out the mounting stud holes about 1/16". Search eBay.
If you don't need one with a PCV tune, you can use a spacer from a an old Ford 200cid engine and drill out the mounting stud holes about 1/16". Search eBay.
- Joined
- Apr 14, 2004
- Threads
- 1,353
- Messages
- 34,453
- Location
- 818-953-9230
- Website
- www.marksoffroad.net
That is good tech Splangy. I did not know this, but wish I had. When destin was doing his '64, he bought one of my spacers even though he didn't need the PCV. It was then we BOTH discovered that the non-PCV carb mounting studs are SHORTER, and there's not enough threads on the stud to accomodate my billet spacer.
It may be karma that I did not have one to sell Angelo. Very cool.
It may be karma that I did not have one to sell Angelo. Very cool.
thecrazygreek
A.K.A. TheCraftyGreek
- Thread starter
- #4
Thx for that info! The original did not have the pcv tube so I'll go with your recommendation.
