Need a 12H-T clutch

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

skoki

skoki

Joined
Apr 2, 2005
Threads
43
Messages
138
Where can I get a clutch for a 12H-T in the Calgary area? I know 4 wheel Auto in Edmonton has them but I'd like to get one right away.
 
How about your dealer,should be the same as a 2h
 
I was told that the 12H-T clutch is not the same as a 2H and my local parts place listing, which is quite extensive, does not list a clutch for a 12H-T but does for the 2H.
 
skoki said:
I was told that the 12H-T clutch is not the same as a 2H and my local parts place listing, which is quite extensive, does not list a clutch for a 12H-T but does for the 2H.
Click to expand...

This aussie site show that a clutch for a HJ61 is the same as HJ60 FJ60/62/70/73/75 from 1982-92
They are all 275mm outside diameterx 27.9mm int diameterx 10 spline.
Look under Toyota light commercial and ignore the 6cyl Bundeera bit:rolleyes:

http://www.exedy.com.au/catalogue.asp

Your shop probably doesnt list a 12HT clutch because they were not sold in North America
 
Last edited:
From the European market EPC
EPC HJ61clutch.webp
 
skoki said:
I was told that the 12H-T clutch is not the same as a 2H and my local parts place listing, which is quite extensive, does not list a clutch for a 12H-T but does for the 2H.
Click to expand...


if you were already told, why are you asking? and if you are asking, why don't you believe the information given?
what more can anyone do except tell you it is the same?
12HT will not show up in a canadian/US parts catalog, since the engine was never sold here.
 
Who pissed in your coffee? As is quite often the case when dealing with these trucks there is conflicting info. I've had 2 respectable Toyota specialty shops tell me they are different and everyone else says they are the same. Before I drop $500 on a clutch I thought I'd ask this site. That is what this site is for, isn't it?
 
Not only are the clutch discs the same for the 2H/12HT, the pressure plate for the 13BT/1HZ/2H/12HT are all the same...made for a 275mm disc.

hth's

gb
 
You must log in or register to reply here.

Share this page

Back
Top Bottom