This vehicle has been my ride since 2004, I love it, I bought it with 70K on the clock, now has approximately 249K miles. I have replaced the pesky heater hose changed the transmission fluid and filter to synthetic, it's time (past time) to do it all again. I just put a 3 row copper radiator in it, and it's still running great. AC still blowing cold--Never serviced. So I have bought new tires, and other than what I've outlined, I have never touched any steering components. I need a check list of what I need to do at this mileage mark. I've kept up with tune ups and different mods (did put old man EMU springs on it a few years back- thinking that would solve the roll and wandering). The birfields never have leaked. I have not pushed this vehicle, thus almost 1/4 million on the clock. I feel that I need to do the steering box rebuild (years ago there were some guys down south that did it for 250$-don't see anything on the posts about them anywhere). I could go on and on, but need to start addressing the steering issues. I have read some of the steering box rebuild threads, and think I could do it, although I know nothing about how the thing actually works. I could use some good advice on how to proceed, especially the sequence of repairs or checks on steering components, ball joints, etc.,etc. Thanks for your wisdom.