My Impression of Cooper AT3 XLT 315s on stock 80

Joined
Aug 5, 2016
Messages
12
Location
South Mississippi
Visit site
I rarely post but thought I’d share. I picked up an 80 from TroutBear (great guy) back in December and finally got around to getting a new set of tires. Went from 265/75/16 KO2s to Cooper AT3 XLTs in 315/75/16. Stock suspension with a 30mm spacer up front. Been driving the last week to and from work and first thing I noticed was how much quieter the Coopers are. Also the ride quality is a lot better. There is a large hill as soon as I hop on the highway so I noticed a little lag In acceleration but its definitely nothing major. I do leave the power button on now though. I haven’t had any rub so far. The Coopers do seem to run smaller than normal , the 315s measured just shy of 34” this morning when I checked. I didn’t have a tire gauge handy so not exactly sure the psi. I haven’t left the pavement with them so I can’t speak of how they perform off-road. Overall very happy with them for a daily driver. Here’s before and after pics. Hope this helps.
0F9C0CB0-BEA0-4AE9-8236-4B116EDD5595.jpeg
B73BD5AC-A0F7-4EA6-BEE5-D341CA7A181D.jpeg
 
Joined
Aug 3, 2014
Messages
511
Location
Monument
Visit site
Have 22k on mine and they are still looking good in a 37. Still quite and drive nice and straight. The blow money side of me wants to get a more true to size 37 that looks a little more aggressive but I know I shouldn’t these tires are awesome and do everything I have asked of them. Hope you have a similar experience!

518A2D25-EF79-4221-B7C7-264046FC6678.jpeg


5B1098E5-9768-4786-9AFF-2C9B3A5985FB.jpeg
 

Users who are viewing this thread

Top Bottom