My Catch Can after 5K km (7 Viewers)

[Tapage]

Well few weeks ago I did my first oil change on 5K mark for my VDJ76 ..

I install the Catch Can before reaching the 200km so mostly from the very beginning ..

This it's what I got from it after 5K

Provent 200

 

[joekatana]

You don't think that is to much for a new mostly stock engine ?

 

[Waikato Willy]

looks alot, have you mounted this higher than the breather so it can drain back?
my poor old 1kzte just has hose running straight out of the rocker cover up higher than the outlet and just dumped straight down the chasis rail, only a small amount of oil mist is visible in the chasis rail

 

[Tapage]

You don't think that is to much for a new mostly stock engine ?

I do ...

I don't know the oil it have from the beginning ..?

nearly 4oz

Now it have Rotella 5W-40 T6 ... so we'll see how it goes ..

 

[boozewz]

That does look like a lot.

I just put one in my VDJ200 so will report back how it is after 5,000km

What have you done to your 200 Series this week?

Can you confirm that you've done this? Slee told me that the LC rocker panels had to be done first before putting the sliders on. I have the sliders for the 2013 LX570 but am waiting on the LC rocker panels to arrive before installing them. Thanks! Yup you’re good (it’s tight). There are 8...

forum.ih8mud.com

 

[coldtaco]

Does the engine not run in yet maybe affect that?

 

[Tapage]

Does the engine not run in yet maybe affect that?

NO idea ..

I was looking for more opinions and experiences ..

 

[cruiserpilot]

NO idea ..

I was looking for more opinions and experiences ..

You mean, as opposed to stunned silence? I just put a vent hose on the 12HT and ran it
down to the frame until I get catch can installed. The one I got is too big. But I can smell it,
and from looking there is just a mist of vapour escaping after 2000 kms.

 

[Tapage]

Share here same thread in a Down under forum ..

LCOOL.org :: Log in

According to them 120mm seems to be just fine and normal for this engine ..