SpaceGhost
GOLD Star
- Location
- United States
First off, all these parts came off my rig or were bought for it at some point. All are used and in good condition unless specified. I am not trying to get rich, just get this stuff to somebody that can use it. Make offers via e-mail at msmythe@iei.net
1) Fine Spline birf, 7" stub length (no idea what it's from)
Both) Hi and Low horns , the early loud ones from 68.
2) Stock rubber bumpstops and the mounts.
1) Pair of windshield hinges. I got them off ebay and the guy cleaned them up and primed them. Good shape, but I don't have a windshield anymore!
Driveshafts
1) NEW - Three speed flanges on both ends, turned down to 3.80" for SM420 conversion, spicer 5" slip joint, 29" collapsed length. Fit my 2f, sm420 to 3spd tcase, with stock springs reversed. I have $225 in this NEW shaft, but I'm reasonable.
1) USED (great shape) - Three speed flanges on both ends, turned down to 3.80" for SM420 conversion, extra long travel 12" slip joint, 32" collapsed length. Fit my 2f, sm420 to 3spd tcase, with 44044's reversed, and mounted at the front of the frame. This slip joint cost me $190 alone, the tubing is very thick and it has some rash.
Jacobs ignition. This unit is the same as the mileage master or whatever they call it now. Easy to connect, uses your distributor and coil to fire it, and includes plug wires and anti theft switch (u hide). Lots of opinions on these things, but I found it to be an improvement when run with a early vacuum advance points distributor. Points lasted for years, and it improved start up and idle, as far as mileage, I have no idea, I don't track it all! I'm running a DUI now so it's of no use to me. Somebody steal this from me!
I can take pics for serious buyers. Please don't ask just to see what kinda junk I have, I am so busy trying to finish my rig for the Comps. Not trying to be a jerk, hope you understand.
I can deliver to Attica, or ship UPS/Fedex. Come pick stuff up and get smokin deals! Thanks.
1) Fine Spline birf, 7" stub length (no idea what it's from)
Both) Hi and Low horns , the early loud ones from 68.
2) Stock rubber bumpstops and the mounts.
1) Pair of windshield hinges. I got them off ebay and the guy cleaned them up and primed them. Good shape, but I don't have a windshield anymore!
Driveshafts
1) NEW - Three speed flanges on both ends, turned down to 3.80" for SM420 conversion, spicer 5" slip joint, 29" collapsed length. Fit my 2f, sm420 to 3spd tcase, with stock springs reversed. I have $225 in this NEW shaft, but I'm reasonable.
1) USED (great shape) - Three speed flanges on both ends, turned down to 3.80" for SM420 conversion, extra long travel 12" slip joint, 32" collapsed length. Fit my 2f, sm420 to 3spd tcase, with 44044's reversed, and mounted at the front of the frame. This slip joint cost me $190 alone, the tubing is very thick and it has some rash.
Jacobs ignition. This unit is the same as the mileage master or whatever they call it now. Easy to connect, uses your distributor and coil to fire it, and includes plug wires and anti theft switch (u hide). Lots of opinions on these things, but I found it to be an improvement when run with a early vacuum advance points distributor. Points lasted for years, and it improved start up and idle, as far as mileage, I have no idea, I don't track it all! I'm running a DUI now so it's of no use to me. Somebody steal this from me!
I can take pics for serious buyers. Please don't ask just to see what kinda junk I have, I am so busy trying to finish my rig for the Comps. Not trying to be a jerk, hope you understand.
I can deliver to Attica, or ship UPS/Fedex. Come pick stuff up and get smokin deals! Thanks.