Melted Relay spot on fuse box, unable to source new connector (1 Viewer)

[Therealtotodile]

Hi everyone,
I ended up melting my headlamp relay, literally into the connector below it. The connector is one section(slot) of the fuse box that lives next to the battery.

Because I don't want to re-wire everything to the fuse box, I originally tried to find a connector that would fit the new 4 pin headlamp relay.

Of course, the DENSO style headlamp relay is configured differently than universal relays -- all the pins are parallel to each other. Every other relay/connector I can find in autozone/oreillys has two sets of parallel prongs that are perpendicular(prongs make square).

Because of this, I have been unable to replace the connector for the headlamp relay. I wanted to ask the forum, if anyone has any clever ideas here, or knows of a connector that could come or be configured to fit the style of the DENSO headlamp relay.

Thank you all,
Chris

 

[White Stripe]

Pictures?

 

[blinkerfluid]

open the fusebox, rewire according to the relays available to you and install

or buy a fusebox from junk and fix it

 

[jonheld]

All of the terminals are available from Toyota and come with a 6" pigtail to splice into existing wiring.
Fusebox Relay Contacts - 82998-12060
Fusebox Blade Fuse Contacts - 82998-12140

 

[blinkerfluid]

All of the terminals are available from Toyota and come with a 6" pigtail to splice into existing wiring.
Fusebox Relay Contacts - 82998-12060
Fusebox Blade Fuse Contacts - 82998-12140

in my experience if that headlight relay melts it renders the fusebox unrepairable