So, after about a year of owning an originial M416, I launched into a refurb this weekend while the family was away. What a job.
Here is the plan:
-changed out axle for a 3500lb axle with toyota bolt pattern. I'll run a 33x9.5 so I have a common spare. In doing so, I ditched the braker.
-cut a tail gate.
- grind off rust and repaint.
-rewire with 12V
-adjust landing leg length
-put spring over with new tires/wheels.
Here is the plan:
-changed out axle for a 3500lb axle with toyota bolt pattern. I'll run a 33x9.5 so I have a common spare. In doing so, I ditched the braker.
-cut a tail gate.
- grind off rust and repaint.
-rewire with 12V
-adjust landing leg length
-put spring over with new tires/wheels.