LX470 33s with 16" wheels pictures request (1 Viewer)

[alikhaneng]

Hi Folks,

I am trying to put the 16" wheels which are -10 offset with 305/70r16 tires. Watned to make sure if this setup will work. Pictures are requested if anyone has the similar setup.

Others can also share their ride photos with bigger or offset tires.

Here is my rig with both low and high on AHC.

High:

Low:

The rim pic also attached, yeah it is bit outdated but I am fan on smaller rims with chrome

 

[willyroo]

which are -10 offset

Standard is +60 offset. They will stick right out of the guards. Putting aside how they will look, your suspension components are likely to be subject to increased stress...

 

[alikhaneng]

Standard is +60 offset. They will stick right out of the guards. Putting aside how they will look, your suspension components are likely to be subject to increased stress...

Standard +60 is set probably because of the bearing location. I think the +60 is not even center-lined with Bearing (experts can advice). Yeah I am going out with -10, So Total 70 mm out of spec but I am compensating with the wider tire of 305 (standard 275). This is push back the centerline 15 mm inwards. So, in total my center line is 55 mm out.

55 mm is slighly above 2 inches and I believe offset wheels are much better than using spacers.