Little help, I should have taken photos as i went, (Ac dryer and diagonal battery tray strap). - Solved. (1 Viewer)

caladin

Noob, but trying to learn
SILVER Star
Joined
May 30, 2011
Messages
531
Location
Pflugerville Tx
Putting the front end back together after I swapped the radiator and ac clutch.

there are a couple parts i cant' remember exactly how they go, if anyone has pics of these installed, I'd greatly appreciate it

1603431319582.png


This part, goes on the passenger side of the radiator, or fan shroud. but I cant' remember exactly where it bolts up (Ac drier?)

1603431609081.png

and this bracket for the Passenger Battery tray, I know it goes diagonally from the battery tray. but again, exactly how/where?

if anyone has pics or diagrams to share that'd be awesome

Thanks,

E-
 
Last edited:
Joined
Oct 15, 2017
Messages
1,213
Location
Ontario - Canada
Photo 1 - is the AC receiver dryer - it mounts with the radiator fan shroud using the top two fan shroud bolts on the right side of the radiator.

Photo 2 - it’s showing where it attaches to the battery tray in the diagram you posted. The other end attaches to the inner fender.
 

caladin

Noob, but trying to learn
SILVER Star
Joined
May 30, 2011
Messages
531
Location
Pflugerville Tx
Thanks FJACS! That was what i needed to know, to find them.

Found an ok Pic of #1, I was trying to rotate it 90 degrees that's what confused me. :)

1603462862348.png


Found a PIC of #2, looking at it now, I have no idea why I couldn't figure that out looking at it last night.

1603462593075.png
 

Users who are viewing this thread

Top Bottom