I've been looking to lift my '83 bj60 for a while now but want something higher than a 2.5'' lift from Old Man Emu! Any reccomendations?
Lifting a bj60? (1 Viewer)
- Thread starter bj60cruiser
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
I think MAF have one OME 4" lift kit, also they have a HABU series 4" lift kit
Last edited:
Alcan will make whatever you want. Adam Tolman had 5" springs made for his FJ40 "MONYPIT" and was running 37s, spring UNDER. Worked great for him.
The general recommendation is to spring it over if you want to go taller than the standard lift kits on the market.
The general recommendation is to spring it over if you want to go taller than the standard lift kits on the market.
I thought I seen 4" and 6" lifts for sale on www.man-that-aint-free's web site.....
- Thread starter
- #5
thanks for the advice!
SOA is it's own thing, either go that way, or stay away.
If you stay SU, then start with OME (Dakar). Get longer shackles (dd113 has this setup dialed). If that's not enough, add a body lift. OME + longer shackes gets you to 3 - 4" of lift, depending on which length shackls you choose. Body lift can go 1 - 2 inches additional. If you need more than that, go SOA.
If you stay SU, then start with OME (Dakar). Get longer shackles (dd113 has this setup dialed). If that's not enough, add a body lift. OME + longer shackes gets you to 3 - 4" of lift, depending on which length shackls you choose. Body lift can go 1 - 2 inches additional. If you need more than that, go SOA.
BlueCruiser84
SILVER Star
You can do a shackle reversal too which will get you maybe 1-1.5 extra inches in the front i think.
Brian
Brian
The MAF kit uses a their 2.5" lifted springs with the shackle reversal too get their 4" lift.
