Length of stock panhard rods? (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 28, 2010
Threads
9
Messages
48
Location
Pahrump, NV
Sorry if it's been covered already, but I couldn't find anything. I just need the length of the stockers. I cut mine and welded in the adjusters but forgot the measure it first.:doh:

Thanks!
 
Don't know, but quick easy way to find out what you need....

Get the truck up on a stand (that cradles the truck from the frame rails), take the panhards off, let the axles settle where they want to be w/o panhards, set the truck back down, then either measure bolt to bolt and that's your length or adjust them until they line up with the bolt holes and install.
 
I got a 4'' kit from Slee and the instruction say 3/8 longer than stock. Is there a right way to measure the location of the axle to the frame?
 

Users who are viewing this thread

Back
Top Bottom