I have a 2002 LC100 and my lower outer seat foam bolsters are worn from use. Does anyone know if I can switch the passenger and driver seat bottoms and still connect the electricals since the inner bolsters are in better shape? Leather is OK and I do not have airbags.
Landcruiser 100 seat pans - are L & R pans interchangable? (1 Viewer)
- Thread starter Milo Frengy
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
GTV
SILVER Star
- Thread starter
- #3
Thanks, I'll do some research!
They are not the same.
>>diagram here
You could remove the covers and use a steamer to get them to come back to life, depending on how far gone they are. It worked well for me but I replaced the bottoms and steamed the backs. If you're going in that deep might as well replace the leather too =]
Could just try to steam right on top of the leather and see if it comes back.
>>diagram here
You could remove the covers and use a steamer to get them to come back to life, depending on how far gone they are. It worked well for me but I replaced the bottoms and steamed the backs. If you're going in that deep might as well replace the leather too =]
Could just try to steam right on top of the leather and see if it comes back.
