Land Cruiser Project/Parts for Sale (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 24, 2002
Threads
20
Messages
52
Location
Green Bay WI
Location
United States
My project has to go! I have no time to finish it. I would prefer to sell the whole thing at once but I may part it out. I'm asking $7,000 or make me an offer. I could help with dilvery. Located in Green Bay,Wisconsin.

1972 Body Complete with fenders and front grill Restored and Painted.
New Driver side floor Boards
New Rocker panels
New rear Sill and Brace
New Rear Corners
New Running Boards
All Body Parts Striped and Epoxy Primered.
Sand Blasted and POR15 Underbody ( 2 coats POR15,2 coats Chassis Black)
Painted White.
Windshield frame POR15 Inside
All Body Parts From Cool Cruisers
**O.E. Drop Down Tail Gate
Fire wall modified to accept 1974 steering column
New body mounts

1972 Frame
Sand Blasted
4 speed cross member installed
2 Coats POR15 Inside of Frame
2 Coats POR 15 and 2 Coats of Cassis Black on Outside of Frame

1972 Hood – Needs Paint
1974 Hood – Has some rust through but is repairable.
1972 Hardtop Complete – Needs to be repainted and reassembled
1972 Hard Doors
1974 Hard Doors
1972 Lower rear doors – Rusty
**Factory soft top and doors needs new canvas
1972 Engine Complete with header and Weber carburetor ran good didn’t burn oil and has good compression.
1974 Engine Complete Balanced and Blue printed when rebuilt not sure on the mileage since rebuild has good compression runs great, has Holley carburetor and header.
1 -1978 4 speed with transfer case – Trans for parts only.
1 – 1974 4 speed – Transmission dissembled cleaned ready for rebuild.
1 – N.I.B. Transmission rebuild kit.
**Fairy Overdrive for the 4speed
Like new clutch Pressure Plate and throw out bearing for 4 speed
Transfer case from 3 speed transmission
3 speed transmission and bell housing
One Pair 1972 Axels Complete Hub to Hub dissembled cleaned and painted with POR15 and chassis black
One Pair 1974 Axels Complete Hub to Hub
**One front 1978 disc brake axel complete dissembled cleaned and painted with POR15 and chassis black. Needs new rotors, calipers, bearings and seals.
2” lift after market springs with shocks
New U-Bolts
New Greaseable Shackles
New Locking Hubs for the Disc brake axle.
New Tail gate latches
New front turn signals
New weather striping for the soft doors
New front winch bumper
**Warn 8242 winch like new off a 1979 FJ40
1 set of coil over shocks for FJ40
1 set of Monroe shocks for a FJ40
1 gas tanks
1 set of 1974 Jump seats
1 set of 1972 Jump seats
1972 Split bench front seat – has been recovered but has a tear in the side of the driver’s seat.
1972 Wire harness
1974 Wire harness
Heaters and dash parts from 1972 and 1974
1974 steering column and wheel
1972 steering column and wheel
Smitty built roll bar
1 Factory Roll Bar
4 -1972 factory wheels sand blasted epoxy primed and painted factory pewter
3 Factory wheels – rusty
1967 FJ40 Title
1972 FJ40 Title
1974 FJ40 Title
All manuals
Parts microfiche and viewer
Miscellaneous small parts.
Paint for the rest of the body parts
Pictures are posted at:
http://pg.photos.yahoo.com/ph/irwin...done=http://pg.photos.yahoo.com/ph//my_photos
 
I think you might be asking a bit much for a project in the stages that yours is.

I know you have a TON of parts but..

I could be wrong tho.
 
I will start the offers at 50.00us cash, delivered to Minnesota!


:beer:



Let me know!
 
does not sound like too high a price,, if things are as stated and in good shape, there is a lot of good parts there,,,, good luck, too far for me,, pm me if you decide to part it out, but try not to as you will end up with offers like POSERs and MACE, and get frustrated knowing other places are getting 4 times what some jerk off is offering you,,,,,and a bunch of stuff you dont want,,,, " hey I know you spent 20 hours and 200$ working on that frame but I can get one almost like it from joe no teeth for 30$ , Ill be nice and give you 32$",,, crap like that pisses me off,, then when they want to sell something it is GOLD,,,,,

MACE you must be one of those guys that sees a 100 price tag and wants it for 20 bucks,,, I can understand wanting to get a good deal from someone, but how do you sleep at night?
 
lol

Pits, I do like an excellent deal but I also believe in being fair.

I really don't want to cloud this thread with something that does not belong here. We can continue this over PM or you can give me a call if you want to talk about how I sleep at night :)
 
Smitty:

I cannot buy your project but I am interested in some of those parts. PM me if you are interested in selling off some.

Thx
 
Smitty,

I am at 54740 WI. I am interested in some of those parts. Not sure if you want to keep at all together or sell some parts and keep some together. Appears you have a pretty complete 72. Could keep that together and sell some others. Interested in at least one factory wheel (with hub clips) and a set of doors (i am cheap so probably the worst condition ones) I could use others but let me know. Thanks you and good luck.
 

Users who are viewing this thread

Back
Top Bottom