Land Cruiser Project/Parts for Sale

Discussion in 'Classifieds - Parts' started by Smitty, Jun 22, 2005.

  1. Smitty

    Smitty

    Messages:
    52
    Likes Received:
    0
    Joined:
    Mar 24, 2002
    Location:
    Green Bay WI
    My project has to go! I have no time to finish it. I would prefer to sell the whole thing at once but I may part it out. I'm asking $7,000 or make me an offer. I could help with dilvery. Located in Green Bay,Wisconsin.

    1972 Body Complete with fenders and front grill Restored and Painted.
    New Driver side floor Boards
    New Rocker panels
    New rear Sill and Brace
    New Rear Corners
    New Running Boards
    All Body Parts Striped and Epoxy Primered.
    Sand Blasted and POR15 Underbody ( 2 coats POR15,2 coats Chassis Black)
    Painted White.
    Windshield frame POR15 Inside
    All Body Parts From Cool Cruisers
    **O.E. Drop Down Tail Gate
    Fire wall modified to accept 1974 steering column
    New body mounts

    1972 Frame
    Sand Blasted
    4 speed cross member installed
    2 Coats POR15 Inside of Frame
    2 Coats POR 15 and 2 Coats of Cassis Black on Outside of Frame

    1972 Hood – Needs Paint
    1974 Hood – Has some rust through but is repairable.
    1972 Hardtop Complete – Needs to be repainted and reassembled
    1972 Hard Doors
    1974 Hard Doors
    1972 Lower rear doors – Rusty
    **Factory soft top and doors needs new canvas
    1972 Engine Complete with header and Weber carburetor ran good didn’t burn oil and has good compression.
    1974 Engine Complete Balanced and Blue printed when rebuilt not sure on the mileage since rebuild has good compression runs great, has Holley carburetor and header.
    1 -1978 4 speed with transfer case – Trans for parts only.
    1 – 1974 4 speed – Transmission dissembled cleaned ready for rebuild.
    1 – N.I.B. Transmission rebuild kit.
    **Fairy Overdrive for the 4speed
    Like new clutch Pressure Plate and throw out bearing for 4 speed
    Transfer case from 3 speed transmission
    3 speed transmission and bell housing
    One Pair 1972 Axels Complete Hub to Hub dissembled cleaned and painted with POR15 and chassis black
    One Pair 1974 Axels Complete Hub to Hub
    **One front 1978 disc brake axel complete dissembled cleaned and painted with POR15 and chassis black. Needs new rotors, calipers, bearings and seals.
    2” lift after market springs with shocks
    New U-Bolts
    New Greaseable Shackles
    New Locking Hubs for the Disc brake axle.
    New Tail gate latches
    New front turn signals
    New weather striping for the soft doors
    New front winch bumper
    **Warn 8242 winch like new off a 1979 FJ40
    1 set of coil over shocks for FJ40
    1 set of Monroe shocks for a FJ40
    1 gas tanks
    1 set of 1974 Jump seats
    1 set of 1972 Jump seats
    1972 Split bench front seat – has been recovered but has a tear in the side of the driver’s seat.
    1972 Wire harness
    1974 Wire harness
    Heaters and dash parts from 1972 and 1974
    1974 steering column and wheel
    1972 steering column and wheel
    Smitty built roll bar
    1 Factory Roll Bar
    4 -1972 factory wheels sand blasted epoxy primed and painted factory pewter
    3 Factory wheels – rusty
    1967 FJ40 Title
    1972 FJ40 Title
    1974 FJ40 Title
    All manuals
    Parts microfiche and viewer
    Miscellaneous small parts.
    Paint for the rest of the body parts
    Pictures are posted at:
    http://pg.photos.yahoo.com/ph/irwin...done=http://pg.photos.yahoo.com/ph//my_photos
     
  2. Mace

    Mace rock scientist.. Staff Member s-Moderator

    Messages:
    21,515
    Likes Received:
    1,967
    Joined:
    Feb 17, 2002
    Location:
    Las Vegas
    I think you might be asking a bit much for a project in the stages that yours is.

    I know you have a TON of parts but..

    I could be wrong tho.
     
  3. Poser

    Poser Oh...Durka Durka Durka. s-Moderator Supporting Vendor

    Messages:
    20,393
    Media:
    17
    Albums:
    1
    Likes Received:
    797
    Joined:
    Oct 1, 2003
    Location:
    MN
    I will start the offers at 50.00us cash, delivered to Minnesota!


    :beer:



    Let me know!
     
  4. 3pits

    3pits

    Messages:
    2,219
    Likes Received:
    24
    Joined:
    Jan 14, 2005
    Location:
    NE GA
    does not sound like too high a price,, if things are as stated and in good shape, there is a lot of good parts there,,,, good luck, too far for me,, pm me if you decide to part it out, but try not to as you will end up with offers like POSERs and MACE, and get frustrated knowing other places are getting 4 times what some jerk off is offering you,,,,,and a bunch of stuff you dont want,,,, " hey I know you spent 20 hours and 200$ working on that frame but I can get one almost like it from joe no teeth for 30$ , Ill be nice and give you 32$",,, crap like that pisses me off,, then when they want to sell something it is GOLD,,,,,

    MACE you must be one of those guys that sees a 100 price tag and wants it for 20 bucks,,, I can understand wanting to get a good deal from someone, but how do you sleep at night?
     
  5. Mace

    Mace rock scientist.. Staff Member s-Moderator

    Messages:
    21,515
    Likes Received:
    1,967
    Joined:
    Feb 17, 2002
    Location:
    Las Vegas
    lol

    Pits, I do like an excellent deal but I also believe in being fair.

    I really don't want to cloud this thread with something that does not belong here. We can continue this over PM or you can give me a call if you want to talk about how I sleep at night :)
     
  6. Jukelemon

    Jukelemon

    Messages:
    2,396
    Likes Received:
    4
    Joined:
    Dec 29, 2003
    Location:
    Louisville, KY
    Smitty:

    I cannot buy your project but I am interested in some of those parts. PM me if you are interested in selling off some.

    Thx
     
  7. cruiserwanted

    cruiserwanted

    Messages:
    338
    Likes Received:
    0
    Joined:
    May 11, 2003
    Location:
    Elmwood, WI
    Smitty,

    I am at 54740 WI. I am interested in some of those parts. Not sure if you want to keep at all together or sell some parts and keep some together. Appears you have a pretty complete 72. Could keep that together and sell some others. Interested in at least one factory wheel (with hub clips) and a set of doors (i am cheap so probably the worst condition ones) I could use others but let me know. Thanks you and good luck.
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.