Lake City Limo (1 Viewer)

[bobm]

No taxes hair . Can't git thar from Hair ether

 

[Garrissey]

or Croatia, South America, anybody need any blow?

I thought references to substance abuse was frowned upon...

 

[scrapdaddy]

It is

 

[Pigeaten]

I thought references to substance abuse was frowned upon...

my apologies, the double Pale ale is too much for me

 

[Pigeaten]

this is me slinking off out of site

 

[wngrog]

this is me slinking off out of site

Buck up soldier. I’ll split an 8 ball with you.

 

[frismanis]

When the sbc was put in the shifters were moved forward, so the transmission cover needed cutting. Now the H55 moves the shifters further back than stock, so more cutting of the cover would be necessary. A little cut off wheel and welding work (and maybe a hammer) should fix the problem.

 

[frismanis]

Baby steps towards putting on finishing touches. Putting in new door hinges (and clean areas that weren’t accessible with door on the 55). Only had to fish out one bolt so far that fell into the body.

 

[frismanis]

Tomorrow I finish up seat belts and B-Pillar trim, and then start e-brake rebuild.

 

[WarDamnEagle]

Put “air up the tires” on the list.

 

[frismanis]

Put “air up the tires” on the list.

I had to swap on the original tires that came on the 55 and let out all the air to be able to fit it in the short garage (7' door) without removing the Con-Ferr rack... I clear by 1/4" with flat tires. I'll put the 33" tires back on it and move it into the shop garage (8' door) once I get the 40 drivable and out of the shop (waiting on an Orion t-case to be built).

 

[frismanis]

What are these brackets on the b-pillar? I assume they are something to do with the seatbelts.

 

[wngrog]

They have a little wire that directs the belt. You just eliminate them with your new panels.

 

[frismanis]

They have a little wire that directs the belt. You just eliminate them with your new panels.

Cool. Thanks.

 

[xtiaan2000]

Those door sills are great!

Baby steps towards putting on finishing touches. Putting in new door hinges (and clean areas that weren’t accessible with door on the 55). Only had to fish out one bolt so far that fell into the body.

View attachment 2641271

 

[frismanis]

Those door sills are great!

Wish I took an after pic, because all of the rust just wiped off. Sprayed with Rust Converter just to be safe (and to get into the creases that I couldn't quite reach).

 

[frismanis]

More baby steps... cleaned up the parking brake bits last night. Will paint the cover tonight, reassemble tomorrow, and hopefully put it on the 55 on Thursday. Finding time when I can after finishing up at clinic and taking kids to after school activities. 4 days to do a couple of hours of work. lol. Loctite Naval Jelly FTW! Pour it on, let it sit 5 minutes, spray it off with hose.

 

[xtiaan2000]

I was referring to the scuff cover.

 

[Megadoomer]

Nice Yeti work bench.

 

[frismanis]

Nice Yeti work bench.

Use what you got!