Knuckle Arm Studs (1 Viewer)

[NLXTACY]

So does anyone have a toyota part number for the new torx top studs please? In Oz I can get trail gear magnum arp bolts for $25 a piece. Wonder how tojo compares..

For OEM bits:

80 Series OEM Lower Knuckle Stud and Hardware Kit

80 Series OEM Lower Knuckle Stud and Hardware Kit (KAN-3)

absolute-wits-end.com

 

[OGBeno]

90126-12010 for the e-torx studs (e12 is the torx fastener)
94115-71200 nuts
42323-60020 cone washers
90201-12019 flat washers

Correct PN for the nut is 90179-12021.

 

[TomH]

Nothing like bumping a 15 year old thread to remind someone of his failures. Maybe it's a good reminder that it's probably due for another rebuild.

 

[sodafeld1]

Thanking you, everyone!!

 

[AussieHJCruza]

I note with interest that the new ones have some sort of threadlocking compound on them.

 

[sodafeld1]

must admit, I am going loctite blue myself, it is not too hard to remove but sticks the bolts well. 53ftpounds for the studs.

 

[COYS]

For OEM bits:

80 Series OEM Lower Knuckle Stud and Hardware Kit

80 Series OEM Lower Knuckle Stud and Hardware Kit (KAN-3)

absolute-wits-end.com

Does the above kit come with the loctite'ed studs? Photos show studs with no loctite.

80 Series OEM Lower Knuckle Stud Kit

80 Series OEM Lower Knuckle Stud Kit (KAN-2)

absolute-wits-end.com

 

[sodafeld1]

Does the above kit come with the loctite'ed studs? Photos show studs with no loctite.

80 Series OEM Lower Knuckle Stud Kit

80 Series OEM Lower Knuckle Stud Kit (KAN-2)

absolute-wits-end.com

not sure of that kit, but a tube of blue loctite is a worthwhile good thing in the tool kit, goes a long way.

 

[MoJ]

Does the above kit come with the loctite'ed studs? Photos show studs with no loctite.

80 Series OEM Lower Knuckle Stud Kit

80 Series OEM Lower Knuckle Stud Kit (KAN-2)

absolute-wits-end.com

Might click the second link you posted

 

[COYS]

Might click the second link you posted

View attachment 3037072

That's my ask and why I linked it. Does the kit come with the studs with loctite since the studs in the kit don't show loctite on thread.