Know this truck?

Joined
Jun 7, 2009
Messages
15
Location
Portland
I’ve had my 80 for a few years now and I’m the second owner since it was built.
The trunk was built in the Palm Springs area and then sold to the next owner in Oregon, then me.
I believe there was a build thread and that the original builder is a member here.
I’m simply trying to get a little history on the truck.
This is what it looked like when it was sold in California.

Thanks for any help!

5F4FF45C-CF8F-45C2-87F2-1683120FA4E0.jpeg


4842CB47-4AFB-4556-98AF-0ECD6DD7C05D.jpeg
 
Joined
Apr 14, 2016
Messages
1,194
Location
Oregon
Find a build thread, click on the "Builds" badge, and see if you can find it in there. You can add a filter for the year.

Edit: or you can just click on the filter funnel icon near the top and add the build tag there. I've never even noticed that bar until today. How 'bout that.
 
Joined
Jun 7, 2009
Messages
15
Location
Portland
Find a build thread, click on the "Builds" badge, and see if you can find it in there. You can add a filter for the year.

Edit: or you can just click on the filter funnel icon near the top and add the build tag there. I've never even noticed that bar until today. How 'bout that.
I did all that and searched pretty hard with no luck.
Thanks for the feedback though!
 
Joined
Jun 7, 2009
Messages
15
Location
Portland
I am guessing it is a 96/97 LX 450? Any suspension,engine, or interior mods that might make it easier to backtract?
1996 LX450
Arb front bumper
4x4 labs sliders and dual swing out rear
Frontrunner rack with awning, tools and single row LEDs all around.
Slee skid plating
OME suspension
Still had 4:11’s when I got her, sitting on stock LX rims and 315’s
Big, steel Jeep drawer in the back, otherwise stock inside.

That’s the high points…
I’ve changed a lot of things, but that’s pretty close to how I got it.
Had 212k on the clock then, but I don’t know how many miles the previous owner racked up.
 
Joined
Mar 16, 2010
Messages
461
Location
Rossland BC
“The above post was written by a mean sprited, evil, foul-tempered biker snob on a porn filled, worn out computer and contains absolutly no useful or viable information, it was in fact created entirely to misslead and confuse you.”


what’s your point, going forward is it a full stop period.
 
Joined
Jun 7, 2009
Messages
15
Location
Portland
“The above post was written by a mean sprited, evil, foul-tempered biker snob on a porn filled, worn out computer and contains absolutly no useful or viable information, it was in fact created entirely to misslead and confuse you.”


what’s your point, going forward is it a full stop period.
Wow…
I haven’t seen that signature line in ages!
I’d forgotten I’d even used it here.
Time for an update I think!
 

Users who are viewing this thread

Top Bottom