Parts needed:
#1. O'Reilly's part #: 23804 (led innovation 12in led light strips (these are a 2 pack) $24.99
#2. wire strippers
#3. Small flathead screw driver
#4. Electrical tape
#5. (Optional) trim removal tool
#6. A safety pin
#7. A wire coat hanger
This guide is going to be a how to on installing a rear door actuated/controlled cargo light, the install is actually really simple and very inexpensive, (it only cost 25 bucks) I installed this on a 1991 Fj80, but this should work on most other years if not all of them, I am going to ask the 93-97 (hard headliner) guys and girls if they could post pictures of their install, this guide is finished, it's still a work in progress, I need someone with the hard/ molded headliner to post some pictures from their install to completely finish this guide, so please bear with me as I get the rest of the pictures and information together.
Step #1. First you are going to start by opening just the top half of the rear door and start in the top right corner and pull the door seal all the way out around, until you get the seal pulled off to the top of the tailgate, (see pictures 1 and 2)
#1
#2
#1. O'Reilly's part #: 23804 (led innovation 12in led light strips (these are a 2 pack) $24.99
#2. wire strippers
#3. Small flathead screw driver
#4. Electrical tape
#5. (Optional) trim removal tool
#6. A safety pin
#7. A wire coat hanger
This guide is going to be a how to on installing a rear door actuated/controlled cargo light, the install is actually really simple and very inexpensive, (it only cost 25 bucks) I installed this on a 1991 Fj80, but this should work on most other years if not all of them, I am going to ask the 93-97 (hard headliner) guys and girls if they could post pictures of their install, this guide is finished, it's still a work in progress, I need someone with the hard/ molded headliner to post some pictures from their install to completely finish this guide, so please bear with me as I get the rest of the pictures and information together.
Step #1. First you are going to start by opening just the top half of the rear door and start in the top right corner and pull the door seal all the way out around, until you get the seal pulled off to the top of the tailgate, (see pictures 1 and 2)
#1
#2
Last edited: