Issue after suspension install (1 Viewer)

[huddleston]

Today we installed the following:

- icon stage 3 shocks
- nitro gear UCAs
- OME rear springs
- Slee diff drop kit
- spider trax/Slee spacers
- Icon wheels
- toyo RTs

After install the rig sits 1.5” lower on the drivers side compared to the passenger. The torsion bars are cranked and it’s level front to rear, just unsure why there is this much difference side to side.

Any ideas?

Alignment has not been done yet as that is happening tomorrow but I don’t believe that would impact this.

 

[Pucker5]

Swap rear coils perhaps?

 

[MongooseGA]

The whole driver's side is lower? Not just one of the corners?

Like above, check rear coils. DS is generally a smidge taller for the weight of the driver and fuel tank. I don't remember if OME coils are tagged with their designation. I'd also maybe re-index the Tbars. Those would be the 2 easy ones I think.

 

[ikarus]

How much droop do you have? You need at least 2" of droop if you want to maintain ride quality/be able to align it - looks like you might be ok on the driver's side, but I'd drop the passenger side. You want to be around 21-22" hub to fender when it's sitting on the ground.