individual coil packs (1 Viewer)

[ParraCruise]

Hi, I am interested in running individual coils over the spark plugs as an experiment if nothing more.
can this be done and what are the issues?
my car is a AU March 1995 80 series 1FZ-FE 4.5L motor with dizzy.
planing to turbocharge the motor, and install a ECU that can run 6 coil packs for sequential ignition.

one of my motivations is to remove the spark plug leads.
Are there any coil packs that fit directly, subject to mounting screw holes etc?
has anyone done something similar
I beleive I can take the top of the Dizzy off and machine up a plate to seal the dizzy while using the cam angle sensor within it. Is this correct?
what are the issues to overcome?

 

[ajax1]

Later year 1fz ran coil packs I think it was after 98? I believe it was South America engines. Don’t know when the change was or anything more but there was a guy here in America that had the whole set up. Try google search

 

[george_tlc]

1fz-fe coil pack engine into a 80 series

Hi All, I'm about to transplant a coil pack 1fz-fe into my 80 and I need some advise. I was told I could wire the distributor trigger lines to the crank and cam angle sensors, the dizzy has two triggers inside which in the are replaced by the crank and cam angle sensors, and then fire all...

forum.ih8mud.com

there may be more, just search...

cheers,
george.