First time for everything I guess. Left rear window not working, motor/regulator stuck in the full up position. Got power to the switch and switch working, pushing the door switch all I get is a click coming from the motor.
Removed the four bolts holding the regulator to the door and it swunge loose (taped the window to the door first so it wouldn't fall), then slipped the regulator rearward out of the single channel the roller wheel slides in.
So I have the regulator on the table, using a Milwaukee Fuel cordless compact drill driver/impact with a T25 Torx bit and zziipp-zzipp removed two of the torx screws.
Here's the problem, can't get to the third screw, the regulator arm is directly over that one remaining screw and the arm won't budge.
Does the Mud hive mind have a solution?
Removed the four bolts holding the regulator to the door and it swunge loose (taped the window to the door first so it wouldn't fall), then slipped the regulator rearward out of the single channel the roller wheel slides in.
So I have the regulator on the table, using a Milwaukee Fuel cordless compact drill driver/impact with a T25 Torx bit and zziipp-zzipp removed two of the torx screws.
Here's the problem, can't get to the third screw, the regulator arm is directly over that one remaining screw and the arm won't budge.
Does the Mud hive mind have a solution?
Last edited: