I have a Fireball XR700, it's been in and working for years. A recent problem had me replace the coil. Referring to the diagram from Fireball,
there are two wire runs from the ignition switch.
All of my wiring diagrams show one Black/yellow wire to the coil+.
The wire from the switch to the starter is a black/white.
If I have an external ballast coil, where/what is the "start wire", assuming the run is the heavy black/yellow?
there are two wire runs from the ignition switch.
All of my wiring diagrams show one Black/yellow wire to the coil+.
The wire from the switch to the starter is a black/white.
If I have an external ballast coil, where/what is the "start wire", assuming the run is the heavy black/yellow?