Trade Idaho Reconditioned F head, 4 speed Trans/Tcase and Bell-housing. (1 Viewer)

[jctoy]

Location

United States

Reconditioned F head including 6 new exhaust valves, inserts as required, ground seats, guides; and resurfaced. My F engine gave up, head has less than 300 miles and two months on it. Also have 78 2F 4 speed trans/Tcase/Bhousing W/flywheel and air cleaner assembly. Have F block and internals (core) as well.

 

[3_puppies]

where in ID are you located?

 

[jctoy]

where in ID are you located?

South Central, near Twin Falls.

 

[Jordan85]

Are you willing to sell 4 speed and transfer case?

 

[jctoy]

Yes, I am.

 

[Jordan85]

PM sent

 

[DesertFJ40]

Are you open to selling some of the parts? or is it only up for trades? is the 4-speed transmission an h41 or h42? If it's an h41, I'd be interested in purchasing as well as the 4-speed bell-housing. Engine parts i would like are the distributor, starter, and oil fill tube.

Thank you for your time.

 

[jctoy]

Reconditioned F head including 6 new exhaust valves, inserts as required, ground seats, guides; and resurfaced. My motor gave up, head has less than 300 miles and two months on it. Also 4 speed trans/Tcase/Bhousing W/flywheel for 2F. Solid F block and internals (core). #2 piston is shot. Looking to trade for seats, front fenders, TBI, wiring harness, etc. of equivalent value.

View attachment 2063922

View attachment 2063924

View attachment 2063927

View attachment 2063928

View attachment 2063929

I still have these parts; sell or trade.

Reconditioned F head including 6 new exhaust valves, inserts as required, ground seats, guides; and resurfaced. My F engine gave up, head has less than 300 miles and two months on it. Also have 78 2F 4 speed trans/Tcase/Bhousing W/flywheel and air cleaner assembly. Have F block and internals (core) as well.
View attachment 2063922

View attachment 2063924

View attachment 2063927

View attachment 2063928

View attachment 2063929

Still have these parts for sale or trade.

 

[romanpharmd]

Can you ship transmission and transfer case to 33027

 

[jctoy]

I'll look int it. I have to weigh and find a shipper.

 

[romanpharmd]

Here are the pictures

 

[jctoy]

Fenders look good but I'm afraid the shipping cost is prohibitive.

 

[romanpharmd]

You are right, thanks for time, I am going to try to trade them, if possible in Florida

 

[Masonblackmon]

I’m still new and learning so sorry if this is a dumb question, will he F head fit the f1.5 (1974 with 4 speed factory) motor? If so I’m interested

 

[jctoy]

It's possible.; I'm not a guru though. I'm pretty sure there is a thread about it in here somewhere.

 

[Masonblackmon]

Let me research it some more, my understanding is that it’s a 1f motor with a 2 f oiling system, but I’ve only been in the cruiser world for a few months

 

[romanpharmd]

Hello amigo, are you willing to sell the transfer case, I found out if you ship to my place of work will be significantly less.

 

[orangefj45]

If you still have the engine, bell housing, flywheel, trans and t-case .......how much for all of it?
If you can strap it to a pallet and drop it off at the local shipping depot, then I can set up shipping.

Georg

 

[Searcher356]

If you still have the engine, bell housing, flywheel, trans and t-case .......how much for all of it?
If you can strap it to a pallet and drop it off at the local shipping depot, then I can set up shipping.

Georg

Hi, is the head still available?

 

[jctoy]

Hi, is the head still available?

Yes, the head is still available.