For Sale Huntsville, AL FJ60 2.5 lift. (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 13, 2014
Threads
47
Messages
1,575
Location
Huntsville, AL
Location
United States
$800

Located in Huntsville Alabama


I am cleaning my garage and finishing up a frame off rebuild I did on my fj60. I purchased a 2.5” Dobisons kit and installed it on a rolling frame. Kit was around $1800.

Springs have zero miles. The kit came with heavy springs in the rear and I removed a few leaves to soften them up. (Dobison told me to do this bc they were out of medium kits). I ended up doing a SOA and using different springs and redoing my suspension.
I also have a Man a free reverse shackle included that was never installed.

What’s included is in the picture below.

4 Dobison springs.
Extra removed leaves.
Man a fre reverse shackle brackets.
Front axle u bolts.
2 anti inversion shackles
4 Bolts for the fixed point at the frame.
Pair of axle wedges.
Steering stabilizer tapered bolt.

Does not include
Shocks
Steering stabilizer
Rear u bolts. ( haven’t found them yet but if I do I will throw them in.)


I also have lot of their random 60 parts. I add a few pictures.

$800

Located in Huntsville Alabama.
06717DF8-3BF7-483D-90DE-48765D382F9A.jpeg


4556FC88-B48A-426B-944D-722341228A39.jpeg


E5D5D95C-B997-46DC-918B-772F706A72B0.jpeg


A4028DF6-67C3-4D13-B6F4-6770BB1523ED.jpeg


F0DF1EB5-6266-4709-908D-5B7615472029.jpeg
 
@NC LX are you willing to separate? I would be interested in the rear springs (plus packs)... I'm in Nashville...

thanks
 
@NC LX Hey... I noticed what looked to be a complete air snorkel (the part from the front grill to the air cleaner. Is it intact? I need one. Mine disintegrated on me and my 'band-aid' solution is 3" flex hose and duct tape. Shipping would be to 93463.

Thanks.
 
@NC LX Hey... I noticed what looked to be a complete air snorkel (the part from the front grill to the air cleaner. Is it intact? I need one. Mine disintegrated on me and my 'band-aid' solution is 3" flex hose and duct tape. Shipping would be to 93463.

Thanks.
Let me get it out and get some better photos. I’m not sure of the condition.
 
Just the big one through the middle.
The one that counts? LOL.... PM me cost shipped. As 'sexy shiny' as that vent hose is in the truck, it'd be nice to have the stock equipment back in place. LOL...
 
Interested in power steering box shipped to 75089.
 
Interested in power steering box shipped to 75089.
So they will bolt up to a stock 60? Taller shocks needed? Sorry I don't know much about lifts but my springs are completely flat
Yes. They will bolt up but it takes prep work. Factory hangers will have to be removed. New shocks are recommended. Do your research. My cell is 2052181282, call me. Be glad to talk you through it. With the spring and SR it will give you about 4” of lift. New shocks are recommended.


I’ll pm the quote in the box.
 

Users who are viewing this thread

Back
Top Bottom