How to wire 9005/9006 bulbs to 4 H4 LEDs (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 23, 2006
Threads
310
Messages
3,104
Location
The Last Best Place
Looking for information on how to wire an 80 series with 9005 and 9006 plugs to a 4 headlight H4 LED setup. Installing non USA 4 light system with JW Speakers. Researched every thread I could find but still unclear. If anyone has done this on an 80 and has pictures that would really help. Thanks in advance!
 
Last edited:
I have stock headlight housing then used aftermarket leds 9005 and 9006 , I will post the brands, I will post pics if you want, used slee harness, this set up is awsome. My other 80 is stock and this setup rocks.
 
OEM configuration:
Low beams are a switched +12 and a hard ground to the inner fenders.
High beams are a switched ground through the stalk. They get the same +12 as the low beams.

As long as you pay attention to polarity of the new bulbs and use a meter to verify wiring, it should be pretty easy.
 

Users who are viewing this thread

Back
Top Bottom