How to cut hard steel?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 9, 2003
Threads
70
Messages
165
Location
Breckenridge, CO
I'm in the middle of my power steering converstion and I'm at the point where I need to cut my steering column free from the steering box. I thought my sawzall wouldn't have any trouble with it, but I was wrong. I wore down a few quality blades, so that is a lost casue to me now. I was thinking I could get a cut off wheel for my angle grinder, not sure how well that will work either. Any ideas are appreciated.

BTW, its a '71 Fj40 so my steering column goes directly into the steering box. So it needs to be cut while on the truck...
 
The cut off wheel in the angle grinder will work far and away better than a sawzall....


All of these that I have done, I have removed the gear and column, taken the gear apart to get the steering shaft/worm gear assembly out, so that I could cut a 3/16" keyway in the steering shaft...


I was able to use my chop saw on them.


Good luck!


-Steve
 
My vote is for a hot saw. Fire and melted metal is cool.

Hodag
 
Back
Top Bottom