How Bad Will I Rub - 315/75/16 (1 Viewer)

[manh3]

I’ll be on a 2 inch lift via kings oem shocks , aftermarket UCA, ome medium springs and ome torsion bars but should I go 2.5 inch on the lift. My wheels are 16x8 with +10 offset. HOW much rubbing and hammering of pinch welds should I get ready for.

thanks, as you guys are extremely helpful.

 

[dividedan]

Those who have done it themselves will chime in, but with that offset and 315 width they will probably rub badly on the fender, pinch weld, washer fluid reservoir among other places. Sweet spot for offset seems to be more like +20/25. Lift will not help with rubbing unless you never drive it on anything but perfectly flat ground. Body lift is pretty much necessary for big tires like that to clear. I have done a ton of research on this forum regarding 35s as I’m also very tempted, but haven’t tried the install myself, so again you’ll probably get better feedback from those who have. I you can get access to some 18s a 285/75r18 with less backspacing will be a much safer bet and still basically 35” tall.

 

[FlammableFishie]

Beat the pinch welds like they owe you money.