Port outside mirror. I've heard parts ain't available? How to fix?
Last edited:
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Outsane 3D prints all kind of cool stuff for your 80, including little brackets to fix this issue.
Shakey mirror fix with a bracket and bottom post fix
Common problem with the 80 is when the little tabs break on the outside rear view mirrors. https://solvefunction.com/shop/ols/products/150053334-bracket-to-fix-shakey-mirror-on-fj80-fzj80-lx450-with-bottom-reinforcement My fix is a 3d printed petg bracket Here is a how to install. Adjust...forum.ih8mud.com
Thanks to this comment I tried this last night and it worked! No more SMS!Before you buy anything, try tightening the phillips screw on the bottom of the mirror in the middle and see if that does the trick. My 80 had SMS when I bought it. I tightened that screw and it went away.
Glad I could help ya out!Thanks to this comment I tried this last night and it worked! No more SMS!
Well I'll be buggered, been putting up with this for a couple of years and here it is... great tip mate..Before you buy anything, try tightening the phillips screw on the bottom of the mirror in the middle and see if that does the trick. My 80 had SMS when I bought it. I tightened that screw and it went away.
Thank you good sir! Did it do the trick for you?Well I'll be buggered, been putting up with this for a couple of years and here it is... great tip mate..
It sure did, I only stumbled across your post by accident whilst poking around in here. I never even knew that screw was there... thanks again!Thank you good sir! Did it do the trick for you?