Honey Badger build while dd (not dd anymore) (1 Viewer)

[Bike n Board Cruiser]

Still working on the back yard. I thought I could do a knuckle job in a couple days. It gets a lot more difficult when oreillys sells you the incorrect wheel studs. I tried to reuse the ones I had and actually cracked the rotor trying to install them.

 

[Bike n Board Cruiser]

I ordered some wheel studs and new inner axle seals from cruiser outfitters. I also ordered some rotors from an online supplier. I guess we'll see how they hold up. They have been good so far. Only a couple hundred miles.

 

[Bike n Board Cruiser]

New rotors installed and a little trip to the mountains and rivers of Idaho.

 

[Bike n Board Cruiser]

Most recent addition to the Honey Badger is the front bumper. Also, the rear of the truck had some vibrations so after I did a knuckle rebuild and was about to add longer extreme shackles I decided to order new heavy springs. After installing the new brakes during the knuckle rebuild I I intake all the new springs and shackles with 6 degree shims front and rear. The vibrations were still happening so I took it to Ian at South to North Land Cruisers here in Boise. Ian noticed my front springs were on backwards and he tightened up all the front steering components. And we discussed new rear diff and pinion, so I ordered an ARB locker from Cruiser Outfitters and had it delivered to Ian.

 

[Godfather90]

I ordered some wheel studs and new inner axle seals from cruiser outfitters. I also ordered some rotors from an online supplier. I guess we'll see how they hold up. They have been good so far. Only a couple hundred miles.

View attachment 2434212

View attachment 2434213

View attachment 2434214

That crack doesn't concern you?

 

[Godfather90]

That crack doesn't concern you?

I must have read that wrong. You replaced them since I assume. What pads are you running?

 

[Bike n Board Cruiser]

I must have read that wrong. You replaced them since I assume. What pads are you running?

Yes. I did install new Toyota and pads. The pads came from the Rock Auto remanufactured calipers and rotors from R1 concepts.

 

[Bike n Board Cruiser]

Out in the Owyhee Canyonlands