HJ60 2H Turbo Project!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 14, 2007
Threads
30
Messages
352
Location
Toronto
Website
www.matt-mcalister.smugmug.com
Ok I am tired of looking at that gaping hole where a turbo should go on my cruiser the 2h just looks so lonely and I have been reading up on 2H turbo projects for ever and been keeping my eye open for a nice turbo. I know there are lots of other threads on 2H turbos but thought I would start one for my project. The truck runs pretty well with the combination of the 2H, H55F, 4.11 and 32" tires. but I am tired of losing speed on the hills and I will be upgrading to 33" or possible a set of 255/85/16 Toyo MT so a little extra power will be nice.

and.... I also was wheeling this weekend and put a big crack in my exhaust @ the manifold and bent the **** outta the rest of the exhaust and I found a nice turbo for sale so I might as well do the Turbo at the same time I do the exhaust!! so it's go time!!

I think I have most things figured out from all my reading on this site but I still have a few questions left.

1)I have found a turbo I think will work it's a T3/T4 the specs are

.50 A/R Compressor
.63A/R Turbine
3" Inlet & 2" Outlet

from my investigations it seems this turbo will do me just fine but I would like to have others opinion on how this will work with the 2H. it is brand new in box. I would like power to build lower in the rpm range as I barley ever go over 2500rpms and usually cruise around 2200rpms on the highway.

2) this one has really mystified me! How do you guys install the turbo and then get the truck to the exhaust shop??? it's possible I might be installing the Turbo 250kms from where the exhaust shop is. can I drive the truck with no exhaust??? what about heat in the engine compartment or exhaust fumes? not so worried about getting pulled over for the noise.

3)from what I have read flipping my manifold should work right?? it's a once piece from a 1989 2H.

I look forward to all your help on this project.

Matt
 
i dont know about the turbo size, but i do know about running it without a complete exhaust. If you can run about 2 feet of exhaust dropped down after the turbo youll be ok to get to the exhaust shop for now. Actually you should try running it with this amount of pipe for a little ways, you may actually consider just running a straight pipe or high flow exhaust as the turbo takes a lot more noise out of it then youd expect. Ive had my exhaust come apart about 2 feet past and it sounds pretty cool with the turbo whistle.
 
the turbo numbers looks pretty good .. I run 2.5 straight and I'm very pleased on how it performs.

Just a note .. the one piece manifold come with the early 2H and yes you can flip it .. ( search my thread about it )
 
If you are doing the manifold-flip you will have to fabricate an adapter-pipe for the turbo. and a bunch of other pieces. If you can do that yourself, then why take it to a shop for exhaust?

Does the turbo have a downpipe? (beginning of exhast)

Check out my turbo-story: https://forum.ih8mud.com/diesel-tech-24-volts-systems/225695-turbo-2h.html Lots of pic's there
 
Back
Top Bottom