High steer arms

Discussion in 'Diesel Tech / 24 volts' started by Radd Cruisers, Jul 20, 2005.

  1. Radd Cruisers

    Radd Cruisers

    Messages:
    7,958
    Likes Received:
    93
    Joined:
    Sep 28, 2002
    Location:
    Vancouver Island BC Canada
    We did a cut and turn on a axle today and now we are looking for high steer arms here in Canada.

    Anyone aware of some local manufacturers???

    Thanks
    Rob
     
  2. wesintl

    wesintl

    Messages:
    4,518
    Media:
    1
    Albums:
    1
    Likes Received:
    30
    Joined:
    Mar 14, 2003
    Location:
    Between Here and There
    I know it's not in Canada but Luke has by far the nicest arms I've seen. Plus it moves the rod behind the axle less prone to damage. Get the GM ends. Talk about some BEEFY stuff.

    http://4x4labs.com/products/steeringarms.html
     
  3. Exiled

    Exiled

    Messages:
    1,845
    Likes Received:
    31
    Joined:
    Jun 20, 2004
    Location:
    Round Rock, TX
    Isn't OTT in Canada?
     
  4. wesintl

    wesintl

    Messages:
    4,518
    Media:
    1
    Albums:
    1
    Likes Received:
    30
    Joined:
    Mar 14, 2003
    Location:
    Between Here and There
    IIRC Vancouver :whoops:
     
  5. Greg_B

    Greg_B

    Messages:
    4,446
    Likes Received:
    139
    Joined:
    Mar 28, 2002
    OTT is in Richmond.

    I have two arms available. Hogged for ES150's...if you want to go that route.

    Shoot them an e-mail: http://www.ottindustries.com/

    Lukes stuff looks great too...

    gb
     
  6. The Dude

    The Dude

    Messages:
    1,265
    Likes Received:
    32
    Joined:
    Jun 7, 2003
    Location:
    Foam Lake, SK
    With Lukes arms you have to be careful of oil pan clearance. I run them and initially had some issues with my 12H-T.

    A guy in our club has the OTT arms and has slight rubbing issues with the TRE.

    Both are very nice sets, but I like getting that tie rod behind the axle.
     
  7. Greg_B

    Greg_B

    Messages:
    4,446
    Likes Received:
    139
    Joined:
    Mar 28, 2002
    Wow...what's his bs? I have oddles of room with 3.5" bs...

    gb
     
  8. The Dude

    The Dude

    Messages:
    1,265
    Likes Received:
    32
    Joined:
    Jun 7, 2003
    Location:
    Foam Lake, SK
    He has issues with the drag link and the TRE. He is using the OTT dropped pitman arm as well. Not sure if it is a axle placement on the springs issue, as I recall he may have flipped the fronts for added wheel base...
     
  9. Radd Cruisers

    Radd Cruisers

    Messages:
    7,958
    Likes Received:
    93
    Joined:
    Sep 28, 2002
    Location:
    Vancouver Island BC Canada
    Thanks guys, that was the info I needed.


    Rob
     
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.