Help w/missing alternator adj bolt 1FZFE (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 10, 2014
Threads
1
Messages
3
Location
Fort Collins, CO
After a long road trip over the mountains in my 95 FJ80 1FZFE the alternator adjustment bolt appears to have backed out of its bracket and is missing -- and possibly any washers, etc.

Can anyone tell me what size the bolt is and if it had any washers etc? Is this something I can procure from my local fastener supplier or must I go to Toyota?

Any help is appreciated!

Thanks!
 
About 90cm long, M8 X 1.0

IMG_6489.JPG


IMG_6490.JPG


IMG_6492.JPG
 
Thank you--I should've been more clear. The bolt that's missing is the shorter one that passes through the square block that the longer bolt is threaded through. I can see the back of the bracket, but I suspect there was a nut and washer too? Or maybe I passes through the square piece and threads into something on the alternator bracket?

Again--thank you for your help!

Bob
 
Yes, clarity does make a difference.

90080-10200

M10 X 1.0

About 40mm in length.

It threads into the bottom of the alternator.
 
Onur for the win!
 

Users who are viewing this thread

Back
Top Bottom