Help--rear sway bar installed photo's needed---!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 8, 2010
Threads
42
Messages
270
Location
Oregon
I have an 86HJ60, old rear sway bar is gone, axle brackets present, upper mounts 'welded' on, but trashed. I have a replacement but need close-up photos of where the upper mounts bolt on, as it appears the past welding filled/trashed the old holes, so no guide as to where to properly place the upper brackets.

CAN SOMEONE PLEASE TAKE A PHOTO OF EACH SIDE BRACKET INSTALL LOCATION ON YOUR RIG AND E-MAIL OR POST FOR ME? THANKS SO MUCH!!
LCDiesel60
Oregon, USA.
 
Perfect--thank you 2MBB for the quick reply and very well done info/pics!!!
I see my challenge now as well--my frame has been boxed in back to the bumper and couldn't see how that bracket would mount at the proper angle. Looks like I will need to remove the bracket and go with long bolts through the frame box, add a bushing spacer and get the same result--
Really appreciate the help and solution for a LC 'beginnner'.!!
LCDiesel60
Oregon
 

Users who are viewing this thread

Back
Top Bottom