HELP NEEDED tonight - Power Steering (possible screw up) (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Mainly the return line but it is cheap enough I did both lines.
 
Fuuuuuu!!!! Cannot believe that harbor freight sells this set of line wrenches with the 16mm not included!!!

It’s over for today. Dead stop. Going to drink….

View attachment 3014009

I felt the same way recently. Went to HF to get a 6 point 18mm socket. Looked all over and could only find a deep socket, the 6 point sets all excluded the 18mm for some reason. Went over to the impact tools and there it was.

The air will work it's way out.

16mm is an odd size.
 
Took it for a quick spin around my hood and drove perfectly fine. In fact I’m now convinced that I’ve had this leak happening over the period of the last couple weeks where my steering was harder to navigate in my driveway and now their things been buttoned up, the steering is effortless. I guess I got used to hard steering and just didn’t think about it until I looked for leaks. Crossing fingers this is done the job and couldn’t have done it with everybody in this thread.
 
And as a follow up…thank you for the rec on the heat shield. PITA after lines are in. Bloody knuckles.

26ABB35B-5B52-4883-BFEB-E392A7BA730F.jpeg


157840D8-BD58-47ED-9D33-6651B0F830F2.jpeg


EB6DF2AE-A7ED-40C9-9CDA-A780B360ED4F.jpeg
 
That return line needs to be wrapped also.
 

Users who are viewing this thread

Back
Top Bottom