Help finding part (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 24, 2020
Threads
8
Messages
32
Location
Oregon
Yesterday my 100lc was running very rough and I got a cel for a cylinder 8 misfire. I thought I would just go change the coil but when I went to change it I found the cable that connects to the coil was very loose above it where it connects into the wire harness. I pushed it black in and the misfire went away. So I need to find this cable because the clip is broken. I will attach a photo it is not the coil side, it goes into a blue housing. Please let me know if you have any advice or if you know the part number or name of clip. I’ve already looked though all the diagrams online I could find. Thanks in advance!

807EEC20-E92E-4879-8132-402D21232565.jpeg
 
I have used (4) zip ties to hold connectors together,two parallel with the connector and one on each end of the connector.
 
Get a magnifying glass and look on one of the connectors to see if there is a cast in part number. If there is....then add the prefix number below and see if it brings up your part.

Part number con.jpg
 

Users who are viewing this thread

Back
Top Bottom