Help can't figure out what this connects to (1 Viewer)

Joined
Sep 8, 2013
Messages
222
Location
Campbell, Ca
Trying to button up my throttle body after doing the valve cover gasket. Can't figure out where this Grey connector connects to. I marked most of the connectors as I took them off not this one. Do I need to take off the throttle body agian? I can't find other Grey connector.

1408568144166.jpg


1408568165534.jpg
 
Joined
Sep 8, 2013
Messages
222
Location
Campbell, Ca
Damn it yes! Now I remember but I wonder if it fell down because I took it off its bracket. I'll have to search further tomorrow because now I'm on my way to work
 

NLXTACY

Wits' End
Supporting Vendor
Joined
Dec 7, 2007
Messages
26,771
Location
West Hills, CA
image.jpg
It's on a bracket with a bunch of metal vacuum lines. If you took the connector off that metal clip then it's likely down by the oil filter just hanging around.
 
Joined
Sep 8, 2013
Messages
222
Location
Campbell, Ca
Thanks guys after about another 45 minutes of searching, i followed the module on the underside of the upper intake to the connector. i had stuffed this in between the fuel rail and block. Getting my big hands in too all those tight spots to change the vac lines caused me to remove this and stuff it. Of course i should have taken a pic of this last connector like i had all the others.
 

Users who are viewing this thread

Top Bottom