Help!!! - 2003 Land Cruiser - 3rd row seat removal (1 Viewer)

[Sowbug2000]

I searched the 100 Forum and couldn't find an answer.....I'm having trouble getting my drivers side 3rd row seat out (i put just that one in recently).

I've read the instructions and the seat isn't sliding back or forward.....the instructions say to slide seat all the way back and then fold up.

So, basically it seems to be locked in place.

I'm having it detailed in an hour.....

Any suggestions would be greatly appreciated!

Thanks!

 

[Trunk Monkey]

Owner's manual has very detailed instructions. Fold seat down with one lever, lift seat up and slide to the back with another, unlock from floor with a third.

 

[Sowbug2000]

Owner's manual has very detailed instructions. Fold seat down with one lever, lift seat up and slide to the back with another, unlock from floor with a third.

1. Seat folded down....check!
2. Lift seat up (from the rear of the seat) and slide back? .......OR fold up towards back/side windows and THEN slide back.

There is no sliding or folding up going on when I lift the handle.

I'll try to take a picture and post.

Trunk....thanks for the reply ....I haven't had these in there in probably 10 years. They've been in the attic.

I'm sure it's User Error....

 

[Trunk Monkey]

You technically don't have to have them folded up from #2 to pull #3, but it makes it easier. When you pull #3, there's no sliding, they just lift the back up out of the latch and then pull backwards to remove from the front latch.

 

[wpod]

Notice that you flip the handle cover "up" to access lever #3