H55 Front Bearing Retainer

Joined
Sep 4, 2021
Messages
3
Location
Albuquerque
I have a '88 FJ62 with a H55 conversion that I did some time ago. Redoing the clutch and need to replace the front bearing retainer on the transmission. It is the type with two journals at the top of the casting to align with oiling holes on the transmission case. Am thinking that it might be Toyota part no. 33131-60040. Any confirmation on that assumption or info. on where to source this part would be appreciated. Will also need the gasket and seal.

IMG_0409.jpg
IMG_0410.jpg
IMG_0411.jpg
 
Joined
Sep 4, 2021
Messages
3
Location
Albuquerque
I talked to Don this morning. We were unable to confirm that detail about the casting by the standard Toyota diagram. He suggested I make a post here to see if we can get some member feedback that might help.
 

Users who are viewing this thread

Top Bottom