Glow Plug Relay (What is going on here?) - 1982 BJ40 (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 14, 2021
Threads
1
Messages
2
Location
Portugal
1982 BJ40 Glow Plug Relay problem: Looking for some advice.

Hello everyone. My Glow plug light does not come on and I found that it is simply not connected, therefore my glow plugs do not get warm before starting.

There are two relays under the dash. One should be a glow plug relay and one a starter relay ( I believe ).

My glow plug light connector is hanging and not connected to anything and there is no where to connect it to that I can find (?).

When I test both relays, both will start the truck when I apply power to the connector. I think it is strange that I can do that with both relays. They should not both be starter relays.

1982 BJ40 Starter and Glow plug relay2.JPG

Any suggestions on where I should plug in my glow plug cable or what is happening here?

Thanks for any help everyone.

Danielle :)

1982 BJ40 Starter and Glow plug relay3.JPG


1982 BJ40 Starter and Glow plug relay5.JPG


1982 BJ40 Starter and Glow plug relay7.JPG
 

Users who are viewing this thread

Back
Top Bottom