Putting rebuilt head on my '84 LC with the 2F. I have the OEM head gasket and wondering if a sealant is needed? Part number is 11115-61010. Thanks, fellas.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Uh oh, do I need to send back and get the 61030? Thanks
Uh oh, do I need to send back and get the 61030? Thanks
The HG should match the head. Earlier heads have a flow director and need a gasket to feed it. Later heads are cast different with no flow director & use a gasket that directs cooling toward the exh ports.
The difference that I remember (and is not visible on the 61010 above) is the 61010 had different waterholes at the rear of the head to feed the flow director that pointed at #6 exhaust.
Other than that, all 2F/3F HG look pretty much the same.
Thanks, guys. I put the VIN in on the Toyota site and it brought up the 61010. Unless there's a glaring difference when I get the head back, I'll stick with it. I appreciate your help.