Builds fzj80 projects.. turbo, h151, unimog portal swaps etc.. (1 Viewer)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Well, that sure answers a lot of questions. :lol:

Bize gösterdiğiniz şeyler, bence, turbo ile 1FZ'nin gerçek gücünü merak eden insanlar için gerçekten yararlı oldu.

an uzj100 a well known referance for ih8mud people, this comparison says more than pages of datas :)

aynen abi, amacim oydu..
 
20200602_185848.jpg

new info screen
 
Last edited:



Gerçekten çok ilginç...

You using the 1HZ/1HD-T/1PZ/1HD-FT/1HD-FTE thermostat? They use the same gasket (16346-66020)

90916-03089: 76C opening temperature, 90C fully open.

90916-03117: 82C opening temperature, 95C fully open.

So you are using a thermostat that opens at a cooler temperature and is fully open for coolant flow at a cooler temperature as well.

Çok güzel çapraz-kullanım. :)
 
So you converted your stock cap and rotor to coil packs? what did you use for the distributor? Please post a list!!
 
Gerçekten çok ilginç...

You using the 1HZ/1HD-T/1PZ/1HD-FT/1HD-FTE thermostat? They use the same gasket (16346-66020)

90916-03089: 76C opening temperature, 90C fully open.

90916-03117: 82C opening temperature, 95C fully open.

So you are using a thermostat that opens at a cooler temperature and is fully open for coolant flow at a cooler temperature as well.

Çok güzel çapraz-kullanım. :)

only 20000cst oil and 1hz thermostat push down cruise temps from 90c to 83c.. waiting for radiator effects...

aynen abi uyumlular, cok basit bir modifikasyon..
 
So you converted your stock cap and rotor to coil packs? what did you use for the distributor? Please post a list!!
i posted list on first page, you need a stadalone ecu and coils..
 
Man o man, subscribed!
 

Users who are viewing this thread

Back
Top Bottom