Front Lateral Rod Removal (1 Viewer)

[Indiana80]

Been soaking my front lateral rod bolts on my 92 in PB Blaster for a few weeks in prep of removal and bushing replacement. Curious about removal of the bolt on the passenger side by coil spring. Looks hard to get a wrench on the nut side. Is that nut staked? Or will it stay in place when simply loosening the bolt with a breaker bar and floor jack?

 

[Nframe]

It will stay in place.

 

[Rwhat]

Make sure to spray the captive nut.

 

[bwakeling]

put some heat on it too

 

[lumbee1]

it is a captive nut but if you put too much effort into breaking the bolt loose, the captive nut can come off as well. I prefer an impact after soaking with PB blaster.