- Location
- United States
Cleaning house here and have some things I have been holding on to for "way" too long... Ideally I'd love to get "something" for them but at the same time I am considering taking it all to the dump so first offer gets it, plus cost of shipping (probably the killer on most of this stuff). I can ship FedEx ground though so most of this stuff should actually not be too bad...
- Grey rear FJ55 seats, upper and lower portion and in very clean shape, no rips or tears, just needs a good wipe down. These are the OEM vinyl...
- A '71 FJ55 gas Tank. Was coated with a light layer of rust so I took in and had professionally recoated. Only thing was I noticed some stoppage coming from the fuel port so I pulled and swapped for another, immaculate tank I acquired and never bothered fixing this one. The coating was $140 alone and reders basically a brand new tank. I think if someone took something like the housing for a choke cable and put it in a drill and cleaned out the port, it would work great. I guess I could take a stab at this. I would love to recoupe something for this but either way, and shipping would be a little exspensive (proibably $50-70). This is the one with the four emissions ports on all four corners, not all right next to the filler neck like the later models. But they are interchangable with proper movement of the emissions hoses (I run a late model in my '71 currently).
EDIT - I cleaned out the port last night and its working great...
- F Bellhousing - good for a SM465 or 420 swap
- Bucket 'O Harness, a 5 gallon bucket with most of my OEM '71 FJ55 wiring harness which was actually in decent shape, but is now in some peieces... Also a bunch of misc OEM relays in there. First person who wants gets it otherwise goes in the trash...
- Grey rear FJ55 seats, upper and lower portion and in very clean shape, no rips or tears, just needs a good wipe down. These are the OEM vinyl...
- A '71 FJ55 gas Tank. Was coated with a light layer of rust so I took in and had professionally recoated. Only thing was I noticed some stoppage coming from the fuel port so I pulled and swapped for another, immaculate tank I acquired and never bothered fixing this one. The coating was $140 alone and reders basically a brand new tank. I think if someone took something like the housing for a choke cable and put it in a drill and cleaned out the port, it would work great. I guess I could take a stab at this. I would love to recoupe something for this but either way, and shipping would be a little exspensive (proibably $50-70). This is the one with the four emissions ports on all four corners, not all right next to the filler neck like the later models. But they are interchangable with proper movement of the emissions hoses (I run a late model in my '71 currently).
EDIT - I cleaned out the port last night and its working great...
- F Bellhousing - good for a SM465 or 420 swap
- Bucket 'O Harness, a 5 gallon bucket with most of my OEM '71 FJ55 wiring harness which was actually in decent shape, but is now in some peieces... Also a bunch of misc OEM relays in there. First person who wants gets it otherwise goes in the trash...
Last edited:
