FJ80 with LX450 Rear Center Bumper Cover

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

May 17, 2016
So I purchased a rear bumper cover for an LX450 to cover the center of the bumper (where the aluminum plate sits) and I was wondering if anyone had attempted to install this on an FJ80 or if it's simply not possible. I've looked on the site here and haven't found any information on this, but if someone could point me in the right direction or fill me in on this idea, I'd greatly appreciate it.

Bump. Can anyone point me in the right direction?
I have not done it, but I am guessing they are 100% interchangeable. The only difference I've noticed is that LX450's have the pintle hitch holes covered up while the 80's tend to be exposed, so while they are not identical, I see no reason it wouldn't fit up. Just give it a try and take pictures for posterity.
Looking at the parts that's what I was seeing, but since I have the entire rear bumper cover from an LX450, I think I would be able to switch it all out without very many problems unless there is a bracket under the bumper cover that is only used on the LX450.

Users who are viewing this thread

Top Bottom