FJ60 Distributor Shaft Bearing Number? (1 Viewer)

[4Cruisers]

As far as I can tell, the sealed bearing on the FJ60 distributor shaft was never sold separately. I have a few like-new Koyo sealed bearings from other Toyota non-Land Cruiser distributors that have the same shaft OD. Has anyone disassembled an FJ60 distributor and noted the bearing part number?

Thanks.

 

[pithicus]

Here is a bit of info about the bearing Seized distributor bearing left me stranded =(

 

[4Cruisers]

Here is a bit of info about the bearing Seized distributor bearing left me stranded =(

Thanks for the reply. I looked at that post but read that the ID of the bearing was 12mm, the OD of the distributor shaft is ~12.43 mm. Hopefully someone has disassembled an FJ60 distributor and will reply.

 

[Spike Strip]

Did you ever find out that bearing number?

 

[4Cruisers]

I've seen 6201DU here on MUD (@pithicus reply above) and elsewhere, but it shows an ID of 12mm everywhere I look. The FJ60 shaft I've measured is 12.43mm OD, and I've read on other (Honda) forums that there is a hard-to-find 12.5mm X 32mm X10mm sealed bearing. I have another Toyota distributor (non-Land Cruiser of the same vintage) torn down on my workbench - it has a 12.43mm OD shaft as well, and a Koyo sealed bearing 83805, also with an OD of 32mm and a 10mm thickness.

Another MUD member is sending me his trashed FJ60 distributor, so I'll be tearing it down next week.

Thanks for asking.